Matthew bethune Posted March 11, 2013 Report Share Posted March 11, 2013 hi i have a link rx ecu in my rx7 just wondering what an volt channel does the internal map sensor work off and is it 2.5 or 4 kpa, cheers Quote Link to comment Share on other sites More sharing options...
Roger1436215387 Posted March 12, 2013 Report Share Posted March 12, 2013 You can configure any An volt inputs, i have AN volt 5 setup using 4bar sensor (the internal map sensor in the RX ecu) Have you wired everything else up? i made the mistake of not insulating the external map sensor wiring which caused a lot of head aches! if using the internal sensor tidy up the other wiring or spend hours of pulling out your hair why the TPS voltage is up the creek..... Quote Link to comment Share on other sites More sharing options...
Simon Posted March 12, 2013 Report Share Posted March 12, 2013 Volt 5 is the internal map and it will be a 4bar sensor. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.