Jump to content

knock detection on linkplus

Fletcher Campbell

Recommended Posts

I have a linkplus v14 on rb30det. The tune is a bit messy so i have bought a wideband and done a bit of data logging. I have attached a pic of rpm, map, and knock from the link. How accurate is the knock detection on the link? The knock reading is usually around 1-2 and above 4000 rpm with boost the knock goes up a bit. the highest reading is around 40. One the link manual it seems to say that knock goes up about 10 per 1000 rpm. Is it knocking? Or do i need one of those headphone type sensors?


Link to comment
Share on other sites

  • 7 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...