Ian1436215387 Posted January 2, 2011 Report Share Posted January 2, 2011 Hey guys, Busy doing my draft setup of the G4 Xtreme on my Nissan S14 race car, For the launch/traction control I obviously will need one front wheel speed sensor and one rear wheel speed sensor... front isnt a problem as the vehicle was ABS equiped and has the sensor on the hub, rear is how ever a problem, these did not come with rear wheel triggers, rather it ran one single sensor in the diff. Here is the question, has anyone set this feature up in an S13/4 before? did you use the diff or gearbox speed sensor for the rear speed reading? also how much of a difference is alowed in the software to compensate if they are radicaly different? (i have no idea how many trigger points there are) Regards Quote Link to comment Share on other sites More sharing options...
Ian1436215387 Posted January 4, 2011 Author Report Share Posted January 4, 2011 Never mind, i worked it out Quote Link to comment Share on other sites More sharing options...
Jurgen Biggelaar Posted January 13, 2011 Report Share Posted January 13, 2011 Did you want to share that with anyone Ian? Quote Link to comment Share on other sites More sharing options...
Ian1436215387 Posted January 27, 2011 Author Report Share Posted January 27, 2011 I opened the diff to read how many trigger teeth it has on the input and multiplied it by the diff ratio to work out my offset I need to use between the front and rear wheel triggers per rotation. Quote Link to comment Share on other sites More sharing options...
Jurgen Biggelaar Posted February 2, 2011 Report Share Posted February 2, 2011 Wicked... Good on ya Ian. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.