allen mason Posted November 12, 2009 Report Share Posted November 12, 2009 need help with e-throttol setup! Quote Link to comment Share on other sites More sharing options...
allen mason Posted November 12, 2009 Author Report Share Posted November 12, 2009 hi there just need some advice on an e-throttol setup ! the eng is a 6l gen 4 i have got the fp setup worked out and the tp setup will cal properly but still wont work ! im sure its just a simple setup issue. the trottol plate gets driven to the closed position and it reads -100dc Quote Link to comment Share on other sites More sharing options...
allen mason Posted November 12, 2009 Author Report Share Posted November 12, 2009 well got it working but still wouldnt mind hearing from others have yet to try the idle control ,but will see if i can sort that out tomorrow Quote Link to comment Share on other sites More sharing options...
Phil Williams Posted November 18, 2009 Report Share Posted November 18, 2009 Hi Allen, With 100% DC in the fully closed position it would suggest that the motor is wired with the incorrect polarity. Is there anything else you need help with? Regards, Phil Quote Link to comment Share on other sites More sharing options...
allen mason Posted November 18, 2009 Author Report Share Posted November 18, 2009 hi phil thanks for the reply found the issue was with the callibration of the tp the holden throttle body doesnt close when at rest so its probably about 10-12% open (they need about 7-9% to idle) so when you callibrate the tp it takes that as a closed position all i ended up doing was holding the throttle plate fully closed at the beginning of the cal process and it works fine now wouldnt mind hearing what other people have ended up using for the pid controller gains though ! Quote Link to comment Share on other sites More sharing options...
allen mason Posted November 18, 2009 Author Report Share Posted November 18, 2009 phil that sounds awesome . i dont remember wha the default pid settings were ! from memory i thought they were all zeroed out ! dont suppose youd remember what they are hey Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.