Jump to content

Tach Needle sweep issue.

Nigel Harris

Recommended Posts

Hi Simon,

Thanks for the response.

ECU = G4 Plugin into a 1992 300zx ... engine = Twin Turbo

Fault has developed ... Have fitted new Cams and discovered issue upon trying to start the car for 1st time.

ECU is giving the following faults:

AN6 at 5V

AN V6 at GND

AN V3 at GND

AN T2 at V5

Link to comment
Share on other sites

AN V 6 is the Oxy input

AN V 3 is the TPS

AN T2 is the fuel temp

All assuming it is using the stock configuration.

TPS might have an effect on the starting. But the error could just be due to the sensor being unplugged at some point.

I would start by clearing the errors to see if they come back up.

I would also check for any ground wires that might have been left off after the CAM change.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...