Dennis Wiese Posted May 3, 2010 Report Share Posted May 3, 2010 Hi. what function do the dip switches preform, there is no mention in the manual. http://i880.photobucket.com/albums/ac4/GaryST165/Link%20ECU/DSC02964.jpg Quote Link to comment Share on other sites More sharing options...
Simon Posted May 3, 2010 Report Share Posted May 3, 2010 That will depend on the software the sub-board has fitted. (sticker on sub-board micro will show this) If used they are to adjust base timing. However it is quite common for them not to be used at all. Quote Link to comment Share on other sites More sharing options...
Dennis Wiese Posted May 4, 2010 Author Report Share Posted May 4, 2010 thanks simon have posted link to sub board on the other thread. Quote Link to comment Share on other sites More sharing options...
Simon Posted May 4, 2010 Report Share Posted May 4, 2010 Given the application in this case all switches should be off. Switch 1 might move timing by one tooth. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.