Dora Wieland Posted October 29, 2012 Report Share Posted October 29, 2012 Hey there, I´m running a plugin G4 in my Skyline. I´ve connected the Innovate Wideband Analog Output to ANVolt 4. On Startups the Innovate is still in heating - so the G4 produces an Error: 'ECU Fault code 20: An Volt 4 below Error Low value' Where can I fix this? Set logging for this input to off? Or change the 'Low' value!? Regards Quote Link to comment Share on other sites More sharing options...
Brad Hansen Posted October 29, 2012 Report Share Posted October 29, 2012 in pclink go to analogue inputs and down the bottom there will be a fault settings, change whichever one you're using for the LC1 to 'error high= 5.00V' and 'error low= 0.00V' and change your 'error value' to something you will recognise as an error like 1 or something. Brad. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.