Michael Coyne Posted November 6, 2006 Report Share Posted November 6, 2006 Hello, I'm curious about the advertised 10,000 rpm limit of the link ecu. I'm considering using the ecu for tuning a 600cc Honda F4i motor which will see around 14,000 rpm. Can the hardware handle this? Quote Link to comment Share on other sites More sharing options...
Guest Dave Posted November 6, 2006 Report Share Posted November 6, 2006 The older Link ecus had a imposed limit of 10000rpm due to the processor that was used All of the new ecus (G2 and G3 based) use the new 40mhz processor which will more than handle your needs (20000 rpm )all boundries (load and rpm) are adjustable for the fuel and ignition tables so that you can set it up to suit your needs check out the spec sheets on this web site for the new G2 and G3 range of ecus Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.