Jump to content

need help with trigger offset vg30dett

Matthew Smith

Recommended Posts

hi i am runing a link g3 and need help for a trigger offset? my mate recently brought an older g2 that was a 300zx link ecu plug and play in the original computer box.. was woundering if you had the trigger offset handy? also any hint/pointers with geting the speed sensor on the g.box to interface and then go to the dash.. cheers

Link to comment
Share on other sites


We don't have the trigger offset information here, but somebody else may be able to help you. Best bet is to get a timing light and calibrate it yourself.

By dash you mean a Link Dash or the factory dash?

In the case of a factory dash you can 'T' into the electronic speedo wire and run this to a Digital Input on the ECU. A calibration number will need to be adjusted to get the ECU reading the correct speed.


Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...