Ihaia Pirere Posted January 20, 2015 Report Share Posted January 20, 2015 Hey there i would just like to know if anyone knows which wire goes where on my 4age wasted spark set up from dizzy (4 wire) to the loom (Only has 3 wires) or is it best to go to a pro??  Have just started to work on the project and many problems have been sorted however i don't know how to sort this one.. The two photos below are the wires and the plug to dizzy.I have lost the plug also ..Does anyone know where to find one of them? Quote Link to comment Share on other sites More sharing options...
Ihaia Pirere Posted January 20, 2015 Author Report Share Posted January 20, 2015 the dizzy.. Quote Link to comment Share on other sites More sharing options...
Simon Posted January 21, 2015 Report Share Posted January 21, 2015 The Out put from the CAS will need to be wired in to the ECU trigger inputs. http://www.linkecu.com/support/documentation/technical-drawings/C04 The ECU will then be wired to an igniter which will then fire the coils. Quote Link to comment Share on other sites More sharing options...
Ihaia Pirere Posted February 11, 2015 Author Report Share Posted February 11, 2015 Thanks.Where can the plugs be purchased to fit that?And which of the colours in the loom are trigs and ground???moved house and lost the plug that would have made all this so much easyer..one little plug lol... GGRRRR.. Quote Link to comment Share on other sites More sharing options...
Scott Posted February 11, 2015 Report Share Posted February 11, 2015 I can't tell the wire colours from the pdf Simon linked. But if you have the distributor you should be able to hold up the plug, look into it, and then see the colours of the wires out the back side of the plug. The best bet for a plug would be an automotive wrecker or Toyota. Scott Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.