Bård Jørgensen Posted December 29, 2010 Report Share Posted December 29, 2010 Hi, I have a linkplus G2, and 3x MSD dualspark 8224 together with the Link 3 chanel igniter. I'm now looking for more power and E85 tuning, so my question is: Will I be able to use the MSD DIS-4 on a 6 cyl with wastespark? thanks Quote Link to comment Share on other sites More sharing options...
Bård Jørgensen Posted December 30, 2010 Author Report Share Posted December 30, 2010 Does the Linkplus G2 have rising or falling spark edge on the ign 1-8 chanels, or is it optional? Quote Link to comment Share on other sites More sharing options...
Simon Posted January 17, 2011 Report Share Posted January 17, 2011 Yes you can select either through PC link so no problem at all to run the MSD Quote Link to comment Share on other sites More sharing options...
Bård Jørgensen Posted May 9, 2011 Author Report Share Posted May 9, 2011 Ok great.. problem now is that I can't get any spark.. Do I need to use an igniter between the Link G2 and the MSD DIS-4? Quote Link to comment Share on other sites More sharing options...
Top Tune NZ Posted May 12, 2011 Report Share Posted May 12, 2011 yes you will need to run a ignitor as the dis-4 needs a neg trigger. here is a pic i use when wiring in the dis-4 i now its not what you are running but it may help i count find the file i have the wasted spark set up on. c heck the msd forum it may be there also the dis-4 can often over heat if used for anything other than drag racing hope this helps ross honnor [email protected] e Quote Link to comment Share on other sites More sharing options...
Bård Jørgensen Posted May 12, 2011 Author Report Share Posted May 12, 2011 Thank You so much IF I had found something else than the dis4 for the same money I probably wouldn't use it.. Do I use rising or falling spark edge running the DIS through the Link 3ch igniter? Quote Link to comment Share on other sites More sharing options...
Simon Posted May 17, 2011 Report Share Posted May 17, 2011 Running through an igniter you will need to use Falling spark edge. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.