Jump to content

Which Firmware for G4 Storm Version 1.1?


Recommended Posts

Hello Tech Support,

I purchased a used G4 Storm silver case version. The label on the bottom of the case says PCB Rev 1.1, Serial #4779. 

I've actually installed the latest version of PC Link V4.9.3.1194 and did a firmware update using this latest version. Managed to connect via usb cable and did some testing of the outputs, but got some weird readings on some of them. Also, the MAP calibration function doesn't seem to work.

What I'd like to know is which version of PC Link and firmware works best with this unit?


ZK Han

Link to comment
Share on other sites

What you have is spot on. The latest is all ways the one to go for.

Map cal will need to be done with correct sensor selected.

Make sure its on 2.5bar

The current base maps will set this to 4bar. Also check the reading of the baro sensor.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...