Sanford Edinberry Posted July 1, 2010 Report Posted July 1, 2010 Hi there, Please could you let me know what would be the correct setting to detect detonation on MY96 WRX STi? Many thanks, SanMan Quote
Jurgen Biggelaar Posted July 2, 2010 Report Posted July 2, 2010 That would be about 6Khz on an old KnockBlock. Jurgen Quote
Sanford Edinberry Posted July 5, 2010 Author Report Posted July 5, 2010 Hi Jurgen, On the Management Controller it give me the setting of 0-300 ... what should i set it too to detect detonation? Kind regards, SanMan Quote
Simon Posted July 14, 2010 Report Posted July 14, 2010 This a level setting you will need to give the motor run with no knock and set the level a suitable amount above this base noise level. It might take a bit of tweeking as the power levels increase with tuning. What you want is for it to be able to pick up knock but not so sensitive that it picks up background noise. Quote
Sanford Edinberry Posted August 16, 2010 Author Report Posted August 16, 2010 Hi Simon, So if i put a detonation listener (a copper pipe on the intake connected to some mufflers via a plastic pipe) when I hear detonation set the level knock level lower than that? How is a knock link better? Many thanks, SanMan Quote
Simon Posted August 26, 2010 Report Posted August 26, 2010 I would suggest that using a KnockBlock with a very good set of headphones is the best tuning tool. Tuners are raving about this product and how good it is. It will amplify the engine noise so that you can detect even the slightest knock. I do stress the need for top quality headphones as these really make the difference. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.