Joseph Ottesen Posted July 2, 2010 Report Share Posted July 2, 2010 hey, im using a push button to start my engine but would like the start circuit immobilised once the engine is running (because of the position of the switch, and passengers curiosty towards push buttons) so i need something to trigger a relay to open the satrt circuit. ideas include either oil pressure light or alternator lamp but as both of these go out before the engine starts i dont think it will work that well. another idea is using an aux output, set on shift light, to turn on the relay at a certain RPM (below idle) does this sound like an option? (1UZFE G3 PLUS) cheers Joseph Quote Link to comment Share on other sites More sharing options...
Steve1436215419 Posted July 4, 2010 Report Share Posted July 4, 2010 It does to me... Thats what i would try in that situation. (the "relay on above xxxRPM" idea) Quote Link to comment Share on other sites More sharing options...
Jurgen Biggelaar Posted July 20, 2010 Report Share Posted July 20, 2010 ^ +1 Sounds logical. Relay switching the start wire (assuming it is carrying the starting current else no relay needed), and then a spare AUX (maybe an unused ignition channel under AUX Outs - Ign), and select it as a GP Output with one or more switching conditions. One of them set as RPM>650, and so on. Jurgen . Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.