Giannis Leontiadis Posted March 13, 2014 Report Share Posted March 13, 2014 i have one ca18det with id 1000cc 255 warlbro fuel pump and cant doing the fuel map when go 0.6 bar as much fuel i give on fuel map the fuel is lean.......the duty cyl peaked at 50% at 0.6 bar (gt2871) some explanation? Quote Link to comment Share on other sites More sharing options...
Simon Posted March 14, 2014 Report Share Posted March 14, 2014 If you are maxing out the numbers in the fuel table (100%) then you need a bigger master fuel value. If you are finding that even though the duty cycle is increasing but you are not getting more fuel then you have a fuel supply issue. First test will be a fuel flow check you will need to measure the fuel from the return line with pressure applied to the fuel regulator to at least the boot level you plan to run. Quote Link to comment Share on other sites More sharing options...
Giannis Leontiadis Posted March 14, 2014 Author Report Share Posted March 14, 2014 hmmmm ok so if i put fuel regulator change the dead time of injectors.. because change bar of fuel flow right?and how to set master fuel (ms) how to know when is 100%? i use mgp(kpa) with rpm (axis) and my max price is 18.7 at cell so i am good and my master fuel is 50ms. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.