Joseph Ottesen Posted January 18, 2010 Report Share Posted January 18, 2010 Ive got a 1uzfe with a G3plus wired up, just trying to get it started and ive noticed that with the ignition on, engine off. the ignition channels are all on. so my ignitors and coils are turned on... and getting hot. how do i change this? Quote Link to comment Share on other sites More sharing options...
Phil Williams Posted January 19, 2010 Report Share Posted January 19, 2010 Do you have the dwell edge incorrect? Also it could be a wiring issue? Quote Link to comment Share on other sites More sharing options...
Joseph Ottesen Posted January 20, 2010 Author Report Share Posted January 20, 2010 ignitors are subaru x2, 5pins on one side (ign1, ign2, ign3, ign4, ign+) 4pins on the other side (ign1 out, ign2 out, ign3 out, ign4 out) the igniton channels go straight from the linkplus plug to the ignitor plug, ignition is supplied via ignition relay, anthing suspect there? dwell edge hasnt been adjusted, ecu is brand new. anychance it is set like that stock? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.