Jump to content

Link G1 Idle Up Control

Brad Scheigis

Recommended Posts

Hey guys

We have what would appear to be a V3 or V4 here that we are wanting to run a two wire idle up solenoid on. Have wired to Aux 1 and +12v and now need to fit the diode on the board. However checking the hand controller I can see no where to program the ISV, is there a trick to this??


Link to comment
Share on other sites

Hi Brad.

On the hand control if you hold down one of the edit or adjust keys whilst on the Engine RPM it should give you a software ID some thing like D42Vxxx can you get back to me with this code.

Failing this working it should also be on a sticker on the main micro. (lid will need to be removed)

Link to comment
Share on other sites

  • 1 month later...
  • 3 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...