Jimbob Posted June 15, 2013 Report Share Posted June 15, 2013 Hi, Can someone tell me the exact change temperature that a Lem V5 changes from  warm up compensation to base map only and can this temperature be changed? Is there any other settings or sensors (air temp?) that contribute to warm up compensation? Cheers Steve. Quote Link to comment Share on other sites More sharing options...
Simon Posted June 17, 2013 Report Share Posted June 17, 2013 All done through the engine temp sensor and all enrichment is out at 70deg there is no way to alter this cutoff point. Quote Link to comment Share on other sites More sharing options...
Jimbob Posted June 17, 2013 Author Report Share Posted June 17, 2013 Thanks for your reply. I did read 70deg in the manual but when monitoring for a cut off point using a wideband and temp gauge, it looked as though thinks changed close to 80deg C. Mind you the engine was only idling and may have needed a blip on the throttle. Cheers Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.