seized Posted October 26, 2009 Report Share Posted October 26, 2009 In 4.4.3 there doesnt seem to be an option to use the status of a Digital Input as a condition in a GP Output, GP PWM, or Virtual Aux Outputs. I see AN Volts, AN Temp, Speed DI, and the usual engine parameters but no on/off Digital Inputs. Is this planned for a future release? Quote Link to comment Share on other sites More sharing options...
Simon Posted November 3, 2009 Report Share Posted November 3, 2009 It in there on 4.4.3 firmware. It can be used as a condition when set as a GP output. Quote Link to comment Share on other sites More sharing options...
seized Posted November 17, 2009 Author Report Share Posted November 17, 2009 This is on 4.4.3. When I look at the list of conditions, I see the engine conditions (ECT, TPS, RPM, etc), the list of AN Volts, then AN Temps, then Speed Digital Inputs, then Knock, then Aux Value1, Ign Value1, etc. The only thing I see thats close is 'DI Value1 = ON/OFF' but this is with multiple GP Digital Inputs (ie switches) configured. Quote Link to comment Share on other sites More sharing options...
Phil Williams Posted November 18, 2009 Report Share Posted November 18, 2009 Hi Brain, To switch an AUX off a DI, you select 'DI Value1 = ON/OFF', and enter the DI channel you require in the box beside it. Regards, Phil Quote Link to comment Share on other sites More sharing options...
seized Posted November 19, 2009 Author Report Share Posted November 19, 2009 I feel a bit stupid now, that worked thank you Simon and Phil! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.