Jump to content

link g4 IAT SENSOR


scott burdon
 Share

Recommended Posts

Hi Scott.

 

We have always advised running an IAT sensor.  Steve in effect is correct though, as air density is measured by the MAF, and in turn temperature is effecting the air density.  Where you start to run in to annoying little things is Accel fueling and the likes.

 

Link has always recommended MAP as the best option to tune the load axis off, as currently MAF on the load axis on accel fuel, and a couple of other fine trims are extremely difficult to get right.  In short, any of these little trims that ensure a smooth get up and go may suffer if just using the MAF.

 

I hope that makes sense.

 

Jurgen

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...