bazzasti Posted November 21, 2007 Report Share Posted November 21, 2007 Hi there, Just wondering what the value is for this type of coil. I previously used 3.5ms with another aftermarket ECU and that worked fine although it had different ignitors (these will be stock LINK units). I assume 3.5ms will be okay for 12-13V? Cheers Quote Link to comment Share on other sites More sharing options...
ashesman Posted November 21, 2007 Report Share Posted November 21, 2007 I don't know what the correct dwell for those coils is. I would tend to measure them properly, but that requires special test gear. If you used 3.5ms on another ECU and igniter, then there is no reason not to use 3.5ms on the Link ECU and igniter. That assumes that both igniters had about the same current limit... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.