Brendan Sharpe Posted April 16, 2011 Report Share Posted April 16, 2011 Hi all. I just wanted to know whether LINK had any plans with making an adaptor loom to communicate aftermarket dash display units such as AIM or Motec. I love the LINK product but I feel that the LINK diplay is a bit of a let down. I have noticed that Vipec make adaptors. Will these work with the LINK? Cheers, Brendan. Quote Link to comment Share on other sites More sharing options...
Simon Posted April 17, 2011 Report Share Posted April 17, 2011 Hi Brendan. We have the ability to talk to both those dashes you mentioned. We can supply a cable with TX RX and ground available and this is then wired to the dash of choice. Quote Link to comment Share on other sites More sharing options...
Matt Dunn Posted April 27, 2011 Report Share Posted April 27, 2011 We run the Link G4 Extreme with an AIM dash. Took a bit for me to figure it all out but is does work well now. Quote Link to comment Share on other sites More sharing options...
Mike Cullingford Posted May 19, 2011 Report Share Posted May 19, 2011 Hello, i'm building a RS232 type display for an University project. Are you able to give me the RS232 protocols for the Link G4 so i dont have to sniff? This would help a lot. Cheers, Mike Quote Link to comment Share on other sites More sharing options...
Simon Posted May 20, 2011 Report Share Posted May 20, 2011 Hi Mike Just do a search on communications in the PC link help file. Should have all the info you need. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.