Patrick Posted March 19, 2015 Report Share Posted March 19, 2015 Hi link staff I have a G4 plugin for an r32 GTR, I want to bypass the factory fpcu all together and run max voltage full time by adding an external relay. I have a couple of questions. 1. Is Aux 6 (pin 18) a ground signal? 2. Now that i have Aux 1 and Aux 2 free, i want to use one to control a warning lamp and the other to control a solenoid. Once again are these two Outputs a ground signal? 3. Lastly Aux 1 is listed as both pin 106 & 113. Do i simply cut one of the wires and connect that to my aux device while leaving the other still connected to the old factory fpcu? Thanks in advance Pat Quote Link to comment Share on other sites More sharing options...
Simon Posted March 24, 2015 Report Share Posted March 24, 2015 Yes all Aux outputs will be ground switching. The AUX1 is wired to both pins so will need to check that both are disconnected. Quote Link to comment Share on other sites More sharing options...
Patrick Posted March 25, 2015 Author Report Share Posted March 25, 2015 Thanks Simon Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.