Costas Costantinou Posted July 22, 2009 Report Share Posted July 22, 2009 hi i want to set up the anti lag what i need to do to make it works? Quote Link to comment Share on other sites More sharing options...
Simon Posted July 24, 2009 Report Share Posted July 24, 2009 I would start by having a good read through the setup instructions in the manual (PCLink help menu) This gives a very good run down on the setup. In terms of hardware you will require a Switch wired to a DI and some means of bypassing air into the engine past the throttle butterfly. Quote Link to comment Share on other sites More sharing options...
Matt Howe Posted July 24, 2009 Report Share Posted July 24, 2009 Are OEM idle control valves usually big enough to flow enough air into the engine to support anitlag? Say for example one of the subaru valves. Would having the ecu fully open it be enough? At the moment it seems you can only hook up a valve to switch open. Why not use the factory idle valve? Quote Link to comment Share on other sites More sharing options...
Simon Posted July 31, 2009 Report Share Posted July 31, 2009 There is the provision to open a factory ISS to wide open but most of the time this still isn't enough air. This then requiring some other means to get the air in. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.