Anders Reineborg Posted February 24, 2015 Report Posted February 24, 2015 Hi I have a Audi egt sensor that runs on 12volts, is it possible to get the readings for this into the link g4+ extreme ecu? Or do i have to get another egt to get the readings? Quote
Simon Posted February 25, 2015 Report Posted February 25, 2015 Is it a 12V output? Or is the sensor powered by 12V and has a different output? Quote
Anders Reineborg Posted February 25, 2015 Author Report Posted February 25, 2015 It is powered by 12v i don't know what the output is and i don't know how the measure it either? Quote
Simon Posted February 25, 2015 Report Posted February 25, 2015 You will be able to measure it with a volt meter. If its an amplified signal then you should se a 0-5V signal. This could then be fed directly into the ECU on an AN volt channel. Quote
Anders Reineborg Posted February 26, 2015 Author Report Posted February 26, 2015 Allright, should i measure between signal (an volt) and ground? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.