ashesman Posted April 16, 2007 Report Posted April 16, 2007 As you may have noticed this forum has been changed from the general Link Engine Management forum to the G2/G3 specific forum... Please place G2/G3 questions and comments here and use the other forum for earlier Link ECU questions and comments. Thanks Ashley Quote
Jason Conklin Posted April 22, 2007 Report Posted April 22, 2007 Hello Ashley, im going to install a lem g3 on a toyota starlet 1.3 turbo. now my problem is that i need a launch control but at the same time this car is equiped with an ac. so how can i wire this cause from what i know these should be wired to the aux4/digital 1. if i need both of these what can i do? thanks jason Quote
ashesman Posted April 22, 2007 Author Report Posted April 22, 2007 Sorry, there is only one answer... buy a LinkPLus G3... It has 8 digital inputs, you can use these to do A/C, launch control, speed (for launch control, gear detection and closed loop idle), anti-lag, power steer idle up, intercooler spray and whatever else you may need all at the same time... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.