craig mahon Posted August 24, 2008 Report Posted August 24, 2008 I've just fitted a rb26dett into a r32 gts-t using a gtr adaptalink and g3 computer using the base map supplied with the software, i'm also using the factory ignitor and coils. the problem is no spark or injector pulse when i crank the motor. i have spark when i use the ignition test and the injectors pulse when i turn the key on and the fuel primes. the engine is wired to the factory loom correctly as i have both with a factory computer. Quote
Simon Posted September 1, 2008 Report Posted September 1, 2008 Make sure you set up the triggers correctly. You will need to do the Test eccs function to check for the widest slot as this varies between engines. Simon Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.