Shak Khan Posted April 5, 2014 Report Posted April 5, 2014 Hi there  I was wondering on how to change fuel setup so my car does not run rich? Im running a link g4 storm plugnplay on my 200sx. ATM its got 800cc's and it was tuned for 380's All i want to do is change it to make it run better and slowly drive it to the tuner.  And if the compression is higher on my new setup, do i have to fiddle around with anything else?  Thanks alot Quote
Simon Posted April 7, 2014 Report Posted April 7, 2014 You will need to lower you master fuel by roughly half. So if master fuel is currently 12 lower it to 6.This will get the mixtures much it much closer. Quote
Shak Khan Posted April 8, 2014 Author Report Posted April 8, 2014 Thank you  Any thing else i will need to consider before starting to drive it?   Thanks Quote
Simon Posted April 8, 2014 Report Posted April 8, 2014 Just run through the basic set up. TPS cal Configure the inputs and outputs to suit Check ignition is correct (calibrate triggers) Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.