Dochka Posted June 16, 2015 Report Posted June 16, 2015 Hi, I'm running a Link G4 Storm on a Toyota 2jz-vvti engine, everything works fine, except the als system arming, or may i say no arming at all; If i select Di1, Di3, Di9, Di9, it automatically turns als on, without even triggering the wires... On Di2, Di4.. It doesn't work at all, no Anti Lag, even if I touch the wires to ground.. So to turn ALS on/off it's only feasible with a laptop to turn it on/off... Quote
Simon Posted June 16, 2015 Report Posted June 16, 2015 HI If you could attach your map we can check out the settings. Quote
Dochka Posted June 18, 2015 Author Report Posted June 18, 2015 Tune Attached, Please take a look Quote
Simon Posted June 19, 2015 Report Posted June 19, 2015 Looking at the map you have all your Di inputs set to off. You will need to configure the Di to suit how you have your anti lag switch wired. If you have a switch to ground then the Di pullup will need to be turned on. To what Di do you have the switch wired and is it to 12V or to ground? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.