Dan Edhouse Posted May 2, 2007 Report Posted May 2, 2007 Hi there, I have a LEM G3 Installed in my S13. I would like to setup my boost control to be dependant on the current gear. I have successfully setup the speed input and have calibrated the gear ratios, which is all working fine. However there is still no option appearing under boost control for Gear? Is this a function which is just not available yet? Quote
ashesman Posted May 2, 2007 Report Posted May 2, 2007 A think that should be available, will check up and if so will make it visible in PCLink for the next release (today hopefuly)... The settintg you want is under the boost control "Load Index", but is currenlt marked "*unavailable*". Quote
ashesman Posted May 3, 2007 Report Posted May 3, 2007 This has been fixed and will be released in the next few days... Quote
Dan Edhouse Posted May 3, 2007 Author Report Posted May 3, 2007 Thanks Ashley, I take it this will also fix the currently "*unavailable*" option under general purpose output, when trying to use: "Gear > Value" ? Quote
ashesman Posted June 27, 2007 Report Posted June 27, 2007 This is all fixed in the current V3.30... Quote
Matt Dunn Posted July 13, 2007 Report Posted July 13, 2007 Hi there. I ordered my LEMG3 today with the 5 bar map sensor. I am hoping to be able to use a dash mounted variable resistor for boost adjustment as per the spec sheet. Question is, What resistance potentiomer should I use? 1K or 10K or somewhere in between. Matt Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.