JayL Posted May 23, 2013 Report Posted May 23, 2013 Wirings on the plug have snapped... Curious if I can buy a replacement pigtail from somewhere? Is it a generic plug? As it looks to be a smaller version of a PCI Express plug... Quote
Simon Posted May 23, 2013 Report Posted May 23, 2013 Hi The plug is a generic plug so a electronics place might be able to source one for you. Or we can offer a strengthened replacement loom. Quote
JayL Posted May 23, 2013 Author Report Posted May 23, 2013 Hi Simon, Just went down to Jaycar and no go... Can you perhaps point me in the direction of where to source one? Type of plug? PCB Rev 4.0 if this helps, broke very easily... Thanks, Jay Quote
Adamw Posted May 24, 2013 Report Posted May 24, 2013 Looks very much like a Molex micro-fit 3.0 to me. You will be able to get them from someone like RS components, Digikey or Mouser. I would look closely at the drawings for P/N 43025-0600 (6pin receptacle) 43025-0200 (2pin receptacle) 43030-0001 (terminals) You will probably need to by a minimum of 100 terminals but they should be cheap. Quote
JayL Posted May 26, 2013 Author Report Posted May 26, 2013 Thanks AdamW for the detail. Much appreicated! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.