Idle Speed Motor Control

[Drty30]

I'm having a strange problem with my G4+ extreme. It appears that the idle speed motor will not be controlled once the power is cycled on the ecu. The only time that the ecu begins controlling the motor is if i make change to the frequency of the output.

Example: 

I will start the car and it will idle at 600 rpm ( this is where it idles with the motor disconnected). If i go into pc link and say the control frequency is 300 Hz, i can re-enter 300 Hz and hit enter and the idle will jump up to the desired 1000 rpm. 

Any assistance with this will be greatly appreciated.

[Simon]

Check that you have no other AUX output assigned to the same function. You will need to check ignition and fuel drives also if they are not being used for ignition or fuel.

[Drty30]

I believe you are correct. I had Aux 1 set for idle as well as injector out 7. Will correct this and report back.

Thanks!