Jump to content

Sequential injection advantage


Peter Snowdon
 Share

Recommended Posts

Hi, running a G2 on my Rover 3.5 with sequential injection setup and wondering why on the 2D mode does the injector timing position need increasing? is it treated the same as the ignition timing and are they linked in single zone? what is the advantage of 2D zone over single zone? Cheers.

Link to comment
Share on other sites

Injection timing is adjusted to achieve better economy and emissions.  It is common practice to advance injection timing as engine speed increases.  During tuning after fueling is correct for each zone you would adjust the injection timing to make fueling rich as possible.  Then trim fuel back out.  The result is the minimum possible fuel needed for that AFR.  If you want you can uses a single zone and just fix injection timing, but there is absolutely no relationship between ignition and injection timing...

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...