Gary Mounsey Posted March 16, 2009 Report Share Posted March 16, 2009 Ashley, can the canbus be used to plug in more sensors ? If so, does link give out specs for interfacing to it too allow custom ext temp/ pressure etc etc sensors to be added ?? (yes i design electronics, and have a multiple pressure sensor board designed with canbus , so of course i had to ask if it was able to be interfaced to the Link given the right info.) Gary Quote Link to comment Share on other sites More sharing options...
Cameron Moore Posted March 16, 2009 Report Share Posted March 16, 2009 Hi Gary,The simple answer is no. Although the hardware is there, the CANBUS hasn't been implemented in the software yet. The dash communicates through the CAN port, but just uses serial protocols.-Cameron Quote Link to comment Share on other sites More sharing options...
Gary Mounsey Posted March 17, 2009 Author Report Share Posted March 17, 2009 Ah ok cameron, thanks. Is this something in the pipeline in a reasonable timeframe ? (ie if/when canbus enabled, users can plug in input as well as output devices ) Seems a waste to have the hardware there and not be usable. How about closed loop boost control.... thats a big one missing too. Gary Quote Link to comment Share on other sites More sharing options...
Cameron Moore Posted March 17, 2009 Report Share Posted March 17, 2009 Pipeline is getting a bit cramped these days. We're adding features as quickly as we can. But we've stopped promising dates as there is always some more important feature that gets pushed to the front of the queue. For instance at the moment one priority is getting ECU datalogging tidied up. Basically we'll get there when we get there. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.