tasos triantafillidis Posted January 2, 2011 Report Share Posted January 2, 2011 i've done the update from the 4.4.3 firmware to 4.5,and the car doesn't start.it's only cranking.i can't find if something needs to be changed.when i go to the old firmware,everything is ok.could you help me? Quote Link to comment Share on other sites More sharing options...
Jason Conklin Posted January 2, 2011 Report Share Posted January 2, 2011 have a look at the trigger set up it happend to me and the change was in the triggers jason Quote Link to comment Share on other sites More sharing options...
Jurgen Biggelaar Posted January 13, 2011 Report Share Posted January 13, 2011 This is why when you did the update, it came up with a list of things that should be read such as the update to 4.5.0 says... · WARNING. Sync options have been combined into one mode. This sync option MUST be checked and reset to its correct setting. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.