Peter Rundström Posted March 25, 2015 Report Posted March 25, 2015 Hallo! I have been running my Storm for 2 summers now and I have had the same problem from the beginning and that is the gear cut. if you check the video I have attached. when I push the gear shift pedal the DI starts to switch on and of after a couple of seconds, is it anyone that can explain this? And I am holding the pedal still. BR Petergear-cut-problem.wmv Quote
Simon Posted March 26, 2015 Report Posted March 26, 2015 Check the voltage at the input pin to the ECU with a volt meter. If this is jumping around then you have a wiring / switch issue. Quote
Peter Rundström Posted March 26, 2015 Author Report Posted March 26, 2015 Hallo! No that is not the problem, it doesnt mater what kind of switch I use or if I have it as a gp input or gear cut. so it must bee something else. BR Peter Quote
Simon Posted March 27, 2015 Report Posted March 27, 2015 The ECU firmware has be bought up to the most current? We can try it on the bench if you can supply the MAP Quote
Simon Posted March 27, 2015 Report Posted March 27, 2015 The ECU firmware has be bought up to the most current? We can try it on the bench if you can supply the MAP Quote
Peter Rundström Posted March 27, 2015 Author Report Posted March 27, 2015 Hallo! Yes its the latest 4.10.2. Do you want me to e-mail it to you? BR Peter Quote
Peter Rundström Posted April 1, 2015 Author Report Posted April 1, 2015 You got email BR Peter Quote
Simon Posted April 2, 2015 Report Posted April 2, 2015 Email reply sent. Suspect issue is the switch type being set to toggle. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.