Link g1 in r31

[Brodie mckean]

I have purchased a link g1 ecu and it came with a external map sensor how do I wire it into my r31 it's a turbo motor as well  the map sensor has 3 wires coming out of it??

[Simon]

Map sensor will require power ground and signal out.

It is wired in to the AFM plug.

http://www.linkecu.com/support/documentation/g1-engine-management-documentation/gtslinkinstructionmanual

[Brodie mckean]

Do you know which wires it would be if the r31 pinout from the afm plug is 

black wire: ficd solenoid

: black wire: temp sensor

white wire: AACvalve

red wire: ecu control

white wire : ecucontrol

yellow and red wire: ecu control??  

 

 

[Simon]

Sorry I dont.

However you can check the ground and power with a multi meter. Ground will have continuity to the block and on the 12V you can see if you have 12V the signal will be the one left.