tristanlim93 Posted June 16, 2015 Report Share Posted June 16, 2015 Hi there, hope anyone could help me out with this trouble, im from malaysia and i bought this link g4+ storm series ecu to install to my ae86 4age 16v, wiring job i have done for it , the problem i facing right now is i couldnt get any rpm with the ecu... current distributor is 24 tooth from the lower part and top part is 4 tooth, does i need to change to 4agze distributor or i have to modify and grind away some tooth for my distributor?? my current trigger setup has been setup to Trigger 1 -(multitooth)(24count)(position-cam)and the filtering is level 1, trigger priority has been set to trigger 1 as well..and for trigger 2 sync mode to (cam level), is the above configuration that i made was correct?? Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 16, 2015 Report Share Posted June 16, 2015 You will need to grind 3 of the teeth off the top trigger just leaving one tooth. Change your sync mode to cam pulse 1x. Quote Link to comment Share on other sites More sharing options...
Simon Posted June 16, 2015 Report Share Posted June 16, 2015 Bet me too it Adam! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.