JONATHAN BROPHY Posted August 15, 2007 Report Share Posted August 15, 2007 ability to get mesage and alarm and feedback over can to connect in a 3rd barty touch screen to the link to control engine features and display and modification of engine parameters possibily using the danfoss plus 1 display units or simular. Quote Link to comment Share on other sites More sharing options...
ashesman Posted August 16, 2007 Report Share Posted August 16, 2007 Ummmm, nope...  too hard. We have our own CAN protocol (that is not actually used for anything at the moment). The best way to do what you want is to buy an in car PC (not actually that expensive from trademe) and run PCLink on that. You can get them with in dash touch screens etc... Bet they are way cheaper than an industrial display... Quote Link to comment Share on other sites More sharing options...
JONATHAN BROPHY Posted August 16, 2007 Author Report Share Posted August 16, 2007 an industral dasnfoss plus on display trade for a 8" tft model monocrome touch pannel comes in at 600 bucks with can not to bad really. im just wondering what will it be used for i know johndeer tractors and cat diggers and dump trucks have can networks for weight load analisis and engine control and other things. and will it be usable for displays and things Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.