Dennis Wiese Posted May 15, 2013 Report Share Posted May 15, 2013 Hi guys, i drive a nissan r33gtr with your G4 ECU. It works great. Now i want to change the stock coil packs and want to run the Audi ZSE 032 Coils. Is this possible? Is the ecu able to drive the zse coils? If yes, what do i hve to change (apart from getting rid of the power transistor). Does anybody have a Wirirng diagram of the stock RB26dett coilpacks where i can see which pin is what?Thanx a lot and sorry for my bad english. Quote Link to comment Share on other sites More sharing options...
Simon Posted May 16, 2013 Report Share Posted May 16, 2013 Ill make the assumption the audi coil has a built in igniter. So all you will need to do is bypass the factory igniter. And check your dwell times are ok for the new coils. Quote Link to comment Share on other sites More sharing options...
Dennis Wiese Posted May 16, 2013 Author Report Share Posted May 16, 2013 Yes, it has a built in igniter. Thats not the Problem. I think the primary resistance of this coils is lower than 1 ohm. 0,36 ohm i think. Is this a problem? Other way: Your Link G4 ECUs for Audi TT, or Audi RS6, is there anything different to the G4 for rb26?Thanx very much Quote Link to comment Share on other sites More sharing options...
Simon Posted May 17, 2013 Report Share Posted May 17, 2013 No difference and if the coil has its igniter built in we don't need to worry about the primary resistance. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.