rasheedn Posted June 14, 2013 Report Share Posted June 14, 2013 hi there, i am having a weird problem with a subaru v6 plug in ecu i am getting A LOT of trigger 1 errors and rpm reads random numbers i checked the sensor and cleaned it and same thing i put the stock ecu and the car is fine any ideas? Quote Link to comment Share on other sites More sharing options...
Dtech Motorsport Posted June 16, 2013 Report Share Posted June 16, 2013 have you checked that you have set the imobilizer dip switches correctly on the ecu bottom board if these are not correct then you will get all sorts of errors Regards David Heerdegen [email protected] Â Quote Link to comment Share on other sites More sharing options...
rasheedn Posted June 16, 2013 Author Report Share Posted June 16, 2013 i figured it out the wiring harness was burnt from the up pipe! fixed that and all is good now thanks for the help Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.