Sam Guo Posted March 11, 2010 Report Share Posted March 11, 2010 I have turned off aux output on the stepper motor control on the evolink g3 when the idle was running real bad, now I bought a new stepper motor can I just turn the aux output back on, and will it work agian. Which aux output does g3 run for the stepper motor? Cheers sam Quote Link to comment Share on other sites More sharing options...
Jurgen Biggelaar Posted March 16, 2010 Report Share Posted March 16, 2010 Hi Sam. The AUX outputs you will need to wire are 5, 6, 7, 8 for your idle stepper. 5 & 6 to one pair, and 7 & 8 to the other. If you find the stepper trying to pull one way, and then the same way again when it souldn't be, just transpose one of the pairs only. Jurgen Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.