Andy Prior Posted April 20, 2009 Report Share Posted April 20, 2009 I am putting a G4 based system together to go on an old skool Type 4 VW engine with coil over plug set up (this is pretty radical in the aircooled VW world and have nobody to turn to on this). I have purchased the 200mm 58/60 tooth wheel to attach to my crank (by machining it to resemble a toothed ring and attaching to the fan which bolts to the end of the crank). What pick up sensor type would be recommended? It revs to about 5500rpm with 60 teeth = 5500 pulses/sec. Bugshack Quote Link to comment Share on other sites More sharing options...
Cameron Moore Posted April 23, 2009 Report Share Posted April 23, 2009 Hi Andy, I would recommend a 2 wire reluctor sensor, similar to those found in a factory Subaru. We sell a suitable CAS sensor like this. Send an email to [email protected] with your details and we can give you an accurate quote. -Cameron Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.