mi16chris Posted July 28, 2015 Report Posted July 28, 2015 updated from a early firmware tonight and now ever time I go over 105kpa the ecu stops firing the injectors , ive checked all settings and limits etc I cant same to find the problem , ive just downloaded the latest update to see if that helps but wont be able to do this for a few days , has any one seen this problem , im now running 5.4.1 ecu is atomive also added a log file thanks for any help thanks for any help fuel cut.llg Quote
Simon Posted July 28, 2015 Report Posted July 28, 2015 Have a check of the injector settings particularly the short pulse width adder table.Make sure you scroll right across it and check the settings.If you don't know the values they should all be set to 0. Quote
mi16chris Posted July 29, 2015 Author Report Posted July 29, 2015 I've never adjusted theses settings but il check tomorrow thanks for the advice Quote
Phil Posted July 29, 2015 Report Posted July 29, 2015 @Mi16chris Ive never heard of this issue before, but ill look into it tonight and let you know.sounds like something simple Phil Quote
mi16chris Posted July 29, 2015 Author Report Posted July 29, 2015 (edited) Have a check of the injector settings particularly the short pulse width adder table.Make sure you scroll right across it and check the settings.If you don't know the values they should all be set to 0. thank u for ur help that have solved my problem Edited July 29, 2015 by mi16chris Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.