Sutkale 1 Posted November 20, 2015 Report Share Posted November 20, 2015 Hey. Maybe its time to update my Vipec i88 to Link G4+ Thunder. I suppose looms A & B from Vipec i88 fits straight to Thunder. C&D looms needed? Anything else to consider? Quote Link to post Share on other sites
Dave Kriedeman 81 Posted November 20, 2015 Report Share Posted November 20, 2015 Hi Sutkale,yes you are correct looms A and B pinouts are identical to i88 or G4+EXTREME.Looms C and D carry the new extra Digital Inputs, Dual WIDEBANDS, Dual PYRO, etc.If you are upgrading from a FURY then you will need to remove and re -terminate the Onboard wideband to connector C which has both LAMBDA Inputs.The remainder of the 16 Digital inputs are here as well as the new MAIN RELAY CONTROL.Connector D has the DUAL PYRO and the DUAL CAN BUS, NEW AUX 14 VOLT POWER SUPPLY, MORE ANALOGUE VOLT INPUTS MORE AUX OUTPUTS.So the change over is quite simple, with plenty to gain.The 3 axis G SENSOR is onboardRegardsDave. Quote Link to post Share on other sites
Sutkale 1 Posted November 20, 2015 Author Report Share Posted November 20, 2015 (edited) Hi Sutkale,yes you are correct looms A and B pinouts are identical to i88 or G4+EXTREME.Looms C and D carry the new extra Digital Inputs, Dual WIDEBANDS, Dual PYRO, etc.If you are upgrading from a FURY then you will need to remove and re -terminate the Onboard wideband to connector C which has both LAMBDA Inputs.The remainder of the 16 Digital inputs are here as well as the new MAIN RELAY CONTROL.Connector D has the DUAL PYRO and the DUAL CAN BUS, NEW AUX 14 VOLT POWER SUPPLY, MORE ANALOGUE VOLT INPUTS MORE AUX OUTPUTS.So the change over is quite simple, with plenty to gain.The 3 axis G SENSOR is onboardRegardsDave.Sounds like an easy upgrade, thanks Dave! Edited November 20, 2015 by Sutkale Quote Link to post Share on other sites
Ducie54 74 Posted November 21, 2015 Report Share Posted November 21, 2015 These look good. Can't wait to get my hands on one. Quote Link to post Share on other sites
Sutkale 1 Posted November 21, 2015 Author Report Share Posted November 21, 2015 One thing came to my mind with respect Thunder. Is new ECU / software capable of running larger than 3000cc injectors at modelled fuel equation? Would be nice to run on pure VE fuel calculation. Currently the software does not accept larger than 3000cc injectors at modelled fuel equation. I´m running sequential / staged injection where primaries are 1180cc and secondaries 2300cc. Had a quick look to Emtron fuel calculation whereas user may configure both staged injector sets individually. Quote Link to post Share on other sites
Simon 206 Posted November 23, 2015 Report Share Posted November 23, 2015 Hi SutkaleAt this stage its still limited to 3000cc for the modeled mode.It is in the wish list. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.