j333rky 0 Posted November 29, 2015 Report Share Posted November 29, 2015 Hi I wonder if I can help getting a possum link ecu this week and I need to reset and have a Base map really appreciate if someone can help me out thank you Quote Link to post Share on other sites
neil brown 7 Posted November 29, 2015 Report Share Posted November 29, 2015 what year is the car and what u running spec wise Quote Link to post Share on other sites
neil brown 7 Posted November 29, 2015 Report Share Posted November 29, 2015 and what ecu, turbo and injector size Quote Link to post Share on other sites
j333rky 0 Posted November 30, 2015 Author Report Share Posted November 30, 2015 (edited) Td05 20 g440sWalbro fuel pumpFmicNgk 7bNurspec straight through Apexi cone filter Manual boost controller Year 2000 x reg Edited November 30, 2015 by j333rky Quote Link to post Share on other sites
j333rky 0 Posted November 30, 2015 Author Report Share Posted November 30, 2015 It's a possum link version 5 for wrx subaru ? Quote Link to post Share on other sites
Scott 158 Posted November 30, 2015 Report Share Posted November 30, 2015 Hi,You've posted this in the G4 ECU forum section, but we never made a G4 PossumLink, so I'm unsure which ECU you actually have. If it is a G4 WRXLink V5/6 then you can find the standard base-map in the PCLink V4.10.2 base-maps sub-folder.Can you post a picture of the actual ECU? Quote Link to post Share on other sites
j333rky 0 Posted November 30, 2015 Author Report Share Posted November 30, 2015 Quote Link to post Share on other sites
Simon 208 Posted December 1, 2015 Report Share Posted December 1, 2015 That is a G1 unit so have moved the topic to the G1 section.If you perform a reload and then set the TPS span you will have a good starting point for a stock engine.With the 440's you might need to lower the master fuel number a little to get the mixtures leaner. Quote Link to post Share on other sites
j333rky 0 Posted December 21, 2015 Author Report Share Posted December 21, 2015 I have changed the turbo to td05 20 g too and also have a fmic do I have to change anything for that ? Quote Link to post Share on other sites
Simon 208 Posted December 21, 2015 Report Share Posted December 21, 2015 No should heve enough effect to stop you starting the engine.But it is going to have to be tuned from there Quote Link to post Share on other sites
j333rky 0 Posted December 21, 2015 Author Report Share Posted December 21, 2015 Anyone on here help me tune it ? Quote Link to post Share on other sites
Scott 158 Posted December 22, 2015 Report Share Posted December 22, 2015 Where are you based? This may help you find someone to help tune. Quote Link to post Share on other sites
j333rky 0 Posted December 22, 2015 Author Report Share Posted December 22, 2015 South wales uk Quote Link to post Share on other sites
bobby1945 0 Posted February 12, 2016 Report Share Posted February 12, 2016 I have a map - configured for MY99 440 injectors VF22 FMIC ultimate 98 fuel .Cone air filter. Been in my car since 2001 with no issues.It would be a good starting point - not a base map though.Let me know. Quote Link to post Share on other sites
98subaruwrx-gf8 0 Posted August 2, 2016 Report Share Posted August 2, 2016 bobby would your map work or a linkg4plus storm iv got same setup wrx ej20t 440cc injectors if yes can you email me ya map,thanks. stevez69.sm@gmail.com Quote Link to post Share on other sites
Scott 158 Posted August 3, 2016 Report Share Posted August 3, 2016 Hi Steve,A G1 base-map can not be loaded into a G4+ ECU. However you may be able to look at the base-map as a reference for settings.Scott. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.