Tarmizi Ramly Posted February 13, 2016 Report Share Posted February 13, 2016 (edited) Hi all, I need help for trigger setup. This car run small 1.3L eng, K3-ve 1.5L 3SZ-ve.Trigger wheel patern is 36-2-2-2Cam is 3 tooth reluctor type.I use Atom Ecu before and just change to Extreme ecu laat few days. I ran Suzuki swift VTC trigger before but can't run ignition last time. I only can ran G4+ ecu for Injection now. Other function still control by OEM ECU. I am failed to run ignition by g4+ ecu. I hope anyone will help. Best regard Edited February 14, 2016 by Tarmizi Ramly Wrong info Quote Link to comment Share on other sites More sharing options...
Scott Posted February 15, 2016 Report Share Posted February 15, 2016 Hi Tarmizi,The infomration I have for the K3-e/3SZ-VE says to use the 'Subaru EJ20 Quad AVCS' trigger mode. Let us know if this works for you. Quote Link to comment Share on other sites More sharing options...
Tarmizi Ramly Posted February 15, 2016 Author Report Share Posted February 15, 2016 Hi Scott, I already use that Subaru trigger last time at 1st time start it but not working.Sadly I can attached any files here due to all picture I take by my handphone too big Quote Link to comment Share on other sites More sharing options...
Scott Posted February 16, 2016 Report Share Posted February 16, 2016 Hi Tarmizi, Just incase anybody reads this and needs help in the future. Currently you are going to try and use the 'Subaru EJ20 Quad AVCS' trigger pattern. If this is successful you will then try and use the Toyota 2NZ or Toyota 2GR VVT modes. Please let us know how you get on. Quote Link to comment Share on other sites More sharing options...
Tarmizi Ramly Posted February 17, 2016 Author Report Share Posted February 17, 2016 Hi Scott, I had try with Subaru trigger wheel setup last night but trigger 1 error with too much counting & RPM read to high at cranking time.May be I should change the trigger wheel to 36-2. Quote Link to comment Share on other sites More sharing options...
Scott Posted February 17, 2016 Report Share Posted February 17, 2016 That's not good, thanks for letting us know. Going to a 36-2 trigger wheel on the crank is a good way to go. Quote Link to comment Share on other sites More sharing options...
Tarmizi Ramly Posted February 17, 2016 Author Report Share Posted February 17, 2016 I will update after change the trigger wheel soon. Thanks for your support guys. Quote Link to comment Share on other sites More sharing options...
Tarmizi Ramly Posted February 22, 2016 Author Report Share Posted February 22, 2016 Hi everyone.I just try Suzuki Swift VTC trigger type on this. I ran OEM ecu with g4+ tapped on trigger wire to monitor correct trigger. Suzuki swift VTC trigger wheel is same & RPM reading is.matched. 2nd step I done is control injection with g4+ ecu while ignition is control by OEM ecu & its perfect. I will run ignition by g4+ ecu next few days & will update here then. Quote Link to comment Share on other sites More sharing options...
Scott Posted September 15, 2016 Report Share Posted September 15, 2016 For anyone reading this in the future, Tamizi ended up fitting a 36-2 crank trigger pattern and now has the engine running well.I just start that car with new trigger wheel 36-2 with 2NZfe trigger setup. It work well.Scott Quote Link to comment Share on other sites More sharing options...
Tarmizi Ramly Posted September 16, 2016 Author Report Share Posted September 16, 2016 I'm sorry forgot to update here. Quote Link to comment Share on other sites More sharing options...
Nick nicholas Posted February 19, 2021 Report Share Posted February 19, 2021 Hello.. Im running a 3sz engine with oem ecu and tapon atom x and using subaru trigger setup.. But my 2nd cylinder is missfire in low rpm.. It went well when above 3k rpm.. Any solution for that? I use link atom 2 before and using the same trigger setup just fine before i change to atom x.. Hope u guys have a solution for that.. Tq. Quote Link to comment Share on other sites More sharing options...
Adamw Posted February 19, 2021 Report Share Posted February 19, 2021 Please attach a log and a trigger scope Nick nicholas 1 Quote Link to comment Share on other sites More sharing options...
Nick nicholas Posted February 21, 2021 Report Share Posted February 21, 2021 myvi.pclx Quote Link to comment Share on other sites More sharing options...
Adamw Posted February 21, 2021 Report Share Posted February 21, 2021 On 2/20/2021 at 9:30 AM, Adamw said: Please attach a log and a trigger scope Generally the 3SV uses the subaru ej20 quad AVCS trigger mode, not the Subaru V7-10 that you are using. Please attach a triggerscope so we can check. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.