Jump to content

Fury Wide Band - No Heater


Recommended Posts

I can't seem to get the heater to heat. It just bomb out with a Heater took to long Error. I double checked the wiring and continuity tested it. Tried 2 Fury's and both error after a calibration period.. One did get to about 15 degrees and stop the other did nothing. IS there a hidden turn on heater option I'm missing? The second plug has power and both grounds connected and checked.

I also checked 2 sensors, both did the same.

Lyndon.

 

 

 

Link to post
Share on other sites

Check the power supply to the sensor is good enough to supply the required current.

It could be the power supply is dropping out. You could check the voltage to the probe when the heater is trying to run.

 

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...