Cnstman Posted April 19, 2016 Report Share Posted April 19, 2016 Hello, I have a Subaru I88 V10 plug-in for my 2004 USDM STi, and I need another Digitial input. The help file does not show which wire in the expansion connector to use for DI11. I see DI11 in the inputs, just need to know what wire to use. Thanks!Aaron Quote Link to comment Share on other sites More sharing options...
Simon Posted April 19, 2016 Report Share Posted April 19, 2016 Hi Aaron Di11 is not wired on the board. So is unfortunately not available for use. Quote Link to comment Share on other sites More sharing options...
Cnstman Posted May 9, 2016 Author Report Share Posted May 9, 2016 Simon: What about AN Volt 12? Quote Link to comment Share on other sites More sharing options...
Scott Posted May 10, 2016 Report Share Posted May 10, 2016 You don't say if you have the 2004-06 or the 2006-07 model V10 plug-in ECU. Because your vehicle is USDM 2004 i'm guessing the 2004-06. Here is the expansion connector pinout for this ECU: Despite what the text says ANV12 is on the pin shown in the diagram. I will ask for the text to be corrected. Quote Link to comment Share on other sites More sharing options...
Cnstman Posted May 10, 2016 Author Report Share Posted May 10, 2016 Per my first post I have a 2004 usdm sti. Thanks for the info. I also have the smaller 4 pin expansion harness. I can't find the wiring pin out for that in the help file. Do you have that? Quote Link to comment Share on other sites More sharing options...
Scott Posted May 10, 2016 Report Share Posted May 10, 2016 Quote Link to comment Share on other sites More sharing options...
Cnstman Posted May 10, 2016 Author Report Share Posted May 10, 2016 Thanks. Those diagrams show anvolt11 in 2 locations. Quote Link to comment Share on other sites More sharing options...
Scott Posted May 10, 2016 Report Share Posted May 10, 2016 Yes, On ECU schematic version 1.0 and 1.1 (one of which you have I believe) the 4 pin expansion connector has AN V11 and the 8 pin expansion connector does not. However, starting on schematic version 1.2 the 4 pin expansion connector was removed from the ECU and AN V11 was moved to the 8 pin expansion connector. When I posted the 8 pin expansion connector above I did not know which version of the ECU you had. Quote Link to comment Share on other sites More sharing options...
Cnstman Posted May 10, 2016 Author Report Share Posted May 10, 2016 Ok, thanks for all the help. I do have anvolt 11 working, I just could not remember which pin its wired to. Having access to anvolt 12 is a help as I needed one more input. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.