Jump to content

1jz Knock set up Q


ChaserDream
 Share

Recommended Posts

I am Working with a 1jzgte with factory Knock sensors. My question is:

In the storm programming, one of my options to pick from for sensors is the 6khz narrow band. I read somewhere that these 1jz engines most likely use the 6khz narrows. Can anyone confirm what the factory Knock is on these puppies?!

 

Link to comment
Share on other sites

I am Working with a 1jzgte with factory Knock sensors. My question is:

In the storm programming, one of my options to pick from for sensors is the 6khz narrow band. I read somewhere that these 1jz engines most likely use the 6khz narrows. Can anyone confirm what the factory Knock is on these puppies?!

 

Hi ChaserDreams,

You are going to want and use the 7khz setting for this and make sure the narrow band is applied. You will need to also adjust the gain to set the noise level appropriately. Once that is set you can then start to adjust the knock threshold per cylinder. If you need more help let me know and I will help you out as best I can.

tunedbyrde@gmail.com if you need help with the base..... 

cheers,

Rich

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...